WAT Dispenser Troubleshooting and Warranty Info

EcoEnclose has 5 Water Activated Tape Dispensers, each with different features. We have put together a resource below for some possible scenarios in case you are experiencing any issue with your dispenser. You can also find our warranty information below in case you have tried troubleshooting and are still having issues. 

How do I load the tape in the dispenser?

Tape Does Not Have Consistent Moisture

Cause: Water level is too low to properly moisten the tape.
Remedy: Add warm water to the fill line.
Cause: There is high humidity/temperatures. 
  • Remedy for Pull and Tear Dispenser: Add warm water to the fill line.
  • Remedy for Manual and Electric Dispensers: Turn the white plastic screw under the water reservoir. If you lower that screw the water bottle will allow more water into the tank and you should see a difference shortly.
Cause: Brush needs to be replaced.
Remedy: Replace brush. 
Cause: Brush needs to be cleaned. 
Remedy: Clean brush with hot soapy water and replace.

If the above troubleshooting steps did not help, our apologies! If you have purchased your dispenser either within the 30 day return window, or warranty timeline below please reach out to us at hello@ecoenclose.com and we are happy to facilitate the repair. 

Warranty Info

Pull and Tear Tape Dispenser: Warranty: 2 year parts, 6 months labor

Phoenix Kraft Paper Tape Dispenser - Electric: Warranty: 1 year parts & labor

Phoenix Kraft Paper Tape Dispenser - Manual: Warranty: 1 year parts & labor

BP Brand Dispenser - Electric Warranty: 2 year parts, 6 months labor

BP Brand Dispenser - Manual Warranty: 2 year parts, 6 months labor

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us